Hi, im a newbie, i like playing around with different induction coils and my 3d printer to make the stators
i have been playing around with creating my own Rodin coil designs which have 3 induction coils.
its very small with small gauge wire
im after a very basic circuit/low voltage similar to the basic flip flop oscillator but can work 3 outputs, preferebaly with variable frequency.
i was hoping someone could help or point me towards something that would be helpful.please?
so im actually wanting 2 separate circuits to play with
one that drives 2 of the 3 coils at one time and rotates through (coil1 and 2, then 2/3, then 1/3 and repeat)
the other drives 1 of the 3 coils at one time and rotates through (coil1, then 2, then 3, then repeat)
any help i would appreciate
thanks
i have been playing around with creating my own Rodin coil designs which have 3 induction coils.
its very small with small gauge wire
im after a very basic circuit/low voltage similar to the basic flip flop oscillator but can work 3 outputs, preferebaly with variable frequency.
i was hoping someone could help or point me towards something that would be helpful.please?
so im actually wanting 2 separate circuits to play with
one that drives 2 of the 3 coils at one time and rotates through (coil1 and 2, then 2/3, then 1/3 and repeat)
the other drives 1 of the 3 coils at one time and rotates through (coil1, then 2, then 3, then repeat)
any help i would appreciate
thanks