Maker Pro
Maker Pro

Pedal switcher, damaged circuit board

Hi, I purchased a Joyo pxl Pro switcher second hand and have discovered that the end switch (D) is not functioning. I opened up the unit and removing the switch I can see the board is damaged. I'd be incredibly grateful if anybody can have a look at the images and see if there is any way I might be able to repair IMG_20200809_111651_compress40.jpg IMG_20200809_111632_compress93.jpg IMG_20200809_111622_compress73.jpg IMG_20200809_111607_compress65.jpg this. I'm happy to try and wire it directly bipassing the board if that is possible but I can find a schematic and my electronics knowledge is very limited. I can see where most of the circuit goes by looking at the board but it gets difficult around the damaged contacts.
 
Top