Maker Pro
Maker Pro

Understanding Relay Spec's.

R

Rich Grise

Michael said:
OK, as long as Dimmit didn't apply it. You could get VERY sick!
This exchange would almost be amusing if it wasn't so pathetic.
 
T

TheQuickBrownFox

You should see a doctor about that nasty cough.

You are even more retarded than the retards are.
While you're about it

The expression is "while you're at it", you stupid fucktard.
get him to increase the medication for your
mental condition.

There is no medication, and you are the only one in this thread that
has a mental condition other than normal.
If you don't you'll have to go back to your padded
cell.
Oh boy! That was about as funny as a freshly laid turd. Oh... that's
right... you ARE a freshly laid turd!

That is what you call wit?

BwuahahahahahahahahahAHAHAHAHAHAHAHAHAhahahahahahaHAHAHAHAHAhaaa!
 
C

Chieftain of the Carpet Crawlers

This exchange would almost be amusing if it wasn't so pathetic.

Yes, they are. And so are you when you jump on their retard crew
bandwagon, which you have done several times over the years.

You are not as immature a fucking retard as they are, but you are
bringing up the rear. Essentially, all you need to do is GROW THE ****
UP, boy.
 
J

John KD5YI

Get your facts straight, fucktard. It was a box, not a room.

Well, in that case you are wrong (anybody surprised?). You would have
been correct if it were in a room with windows so that some of the
energy (light) could escape rather than be turned into heat by bouncing
off the walls. So, you loose again,
DimBulbAlwaysWrongLowPowerDarkSuckingRunt.
 
Well, in that case you are wrong (anybody surprised?). You would have
been correct if it were in a room with windows so that some of the
energy (light) could escape rather than be turned into heat by bouncing
off the walls. So, you loose again,
DimBulbAlwaysWrongLowPowerDarkSuckingRunt.

You forgot "Nymbecile".
 
1

100WattDarkSucker

Well, in that case you are wrong (anybody surprised?). You would have
been correct if it were in a room with windows so that some of the
energy (light) could escape rather than be turned into heat by bouncing
off the walls. So, you loose again,
DimBulbAlwaysWrongLowPowerDarkSuckingRunt.


No. You lose, as you do not even know *any* of the parameters of the
experiment. So you are completely in the dark... but we knew that.

And the room could be *perfectly* walled, and the light bulb would
still lose. That is not where the loss is at.

I am the one that knows where the losses are in the system and why
those of you in that camp lose. You do not have even the first clue.

KRW is a total retard on the issue.

And finally, the nym is because some folks do not call them "light
bulbs".

Were you not so damned stupid, you would have been able to get that one
as well. But we know better. I have seen some of the dumb questions you
have posed. Get along, little doggie.
 
J

John KD5YI

No. You lose, as you do not even know *any* of the parameters of the
experiment. So you are completely in the dark... but we knew that.

And the room could be *perfectly* walled, and the light bulb would
still lose. That is not where the loss is at.

I am the one that knows where the losses are in the system and why
those of you in that camp lose. You do not have even the first clue.

KRW is a total retard on the issue.

And finally, the nym is because some folks do not call them "light
bulbs".

Were you not so damned stupid, you would have been able to get that one
as well. But we know better. I have seen some of the dumb questions you
have posed. Get along, little doggie.

I underestimated you as a complete know-nothing. You must be the most
complete idiot spawned as a human. It is obvious you know absolutely
nothing about physics and conservation of energy. I would like to see
any calculations or proof that you have that refutes my statement about
you being wrong with respect to the heating involved between the two
different sources. Do it now, DimShit or forever admit that you are just
a dummy that hurls meaningless words around.
 
1

100WattDarkSucker

I underestimated you as a complete know-nothing.

You're an idiot. You have no powers of estimation that are not the
simpleton mumblings of a senile, never had a handle on the world fucktard
like you.

You are a joke.
You must be the most
complete idiot spawned as a human.

You must be looking in the mirror again. Not very mature, Johnny.
It is obvious you know absolutely
nothing about physics and conservation of energy.

Actually, it is obvious that you do not. Particularly since you are
posing an argument about something which you do not even know the
parameters of.
I would like to see
any calculations or proof that you have

Your post proves that you are as stupid as can be achieved.
that refutes my statement about
you being wrong

Generally, every time you make the claim, you are incorrect.
with respect to the heating involved between the two
different sources.

The answer's key is in your statement. The two sources are different.
That is the part you do not understand. That, and the fact that you are
STILL clueless as to the parameters of the experiment. I find it more
than a little amusing that you actually want to argue a point where you
are clueless as to the settings.
Do it now,

Grow the **** up, little boy.

Oh, look! Your fetish is poking out again.
or forever admit

That you have a fecal fetish? No problem!
that you are just

You are looking pretty fucking immature right about now, little boy.

Even moreso now.
that hurls meaningless words around.

Your entire post here was pretty much you looking into a mirror.

In other words (one word, in fact), you can be summed up quite easily.

You are so bad, you are not even worth digestion. You ARE "hurl".
 
A

amdx

"amdx" wrote in message

TheGlimmerMan said:
Are you sure that is what takes place?

Ok Glimmerman,
Here's your chance to show everyone on the group your vast knowledge.

Answer your question,
"What does such a snubber do as the contacts bounce?"
Mikek

4 days, not a peep out of Dimmerman.
Mikek
 
J

John KD5YI

Generally, every time you make the claim, you are incorrect.

How would *you* know? The only bit of math you tried to work was
entirely wrong (how long for light to reach a distant point).
The answer's key is in your statement. The two sources are different.
That is the part you do not understand. That, and the fact that you are
STILL clueless as to the parameters of the experiment.

Oh sure! One is a 100W heater and the other is a 100W bulb. Really
different. And you don't provide parameter because you don't know them
either. Speaking of bulbs, you're the dimmest -- Dimbulb.
 
T

TheGlimmerMan

4 days, not a peep out of Dimmerman.
Mike "Total Piece of Shit" k

I'll start referring to you as "Total Piece of Shit" and see how many
posts you respond to with that "given name".

If you are having trouble with the translation, retard boy, I'll spell
it out for you...

**** you, little boy. Peep that, you pussified fucking retard.

Get a bit more mature, and you might actually start getting answers.

I know better though. I have seen your pathetic stupidity in action,
and know that you too are unable to achieve escape velocity from the hard
wired stupid **** that you are.
 
T

TheGlimmerMan

He never answers real technical questions.

I only answer 'fake' electrical questions?

You are an idiot, John. This is an established fact, and you further
said establishment since you make this claim based on zero knowledge of
ANYTHING about me. You are pathetic, boy. You need your ass kicked too.
He doesn't understand
electronics.

I understand how to beat the **** out of retarded asswipes that spout
unfounded lies about others.

You REALLY need you ass kicked.

You claim I have no electronics knowledge. That is a lie. I claim
that asswipes like you that make such false claims should LOSE you
ability to work in my field. I would love to remove your fingers for
you, John. That is what a fucking unamerican retarded bastard like you
deserves to get (or lose).
I asked him about a HV power supply schematic he posted, presumably as
his own design.

The design is pretty straightforward, John. Your question was pretty
stupid too, since all you needed to do is be familiar with the chip, or
look it up, you retarded ****. That, not to mention the fact that it has
been in use for fucking decades!
No answers.

That is your middle name, boy!
 
C

Chieftain of the Carpet Crawlers

How would *you* know?

That you are stupid? A simple glance at any of every post you ever made
to this group will suffice.
The only bit of math you tried to work was
entirely wrong (how long for light to reach a distant point).

I did not"try to work" math, you retarded ****. I put down a number,
and didn't care if it was right or not. The message was a common sense
one, which you also completely missed and that is also no surprise.

You are an utter idiot, and you will never achieve escape velocity from
the stupid that is you.
 
Top