Hi Guys,
My projector suddenly won't turn on anymore, there is no burnt smell, all the capacitors on the power supply look ok from the outside.
Iv'e checked voltage on the mains input terminals on the power supply board, seems to be ok at around 240V, though when i check the voltage across the fuse just next to it, my multi-meter shows 0V. Iv'e checked the fuse for continuity and it seems fine, and visually it doesn't look burnt. What can be the issue? I also got zapped by the large capacitor on the other side of the board (not visible in the photo), so the current does seem to flow over the board.
My projector suddenly won't turn on anymore, there is no burnt smell, all the capacitors on the power supply look ok from the outside.
Iv'e checked voltage on the mains input terminals on the power supply board, seems to be ok at around 240V, though when i check the voltage across the fuse just next to it, my multi-meter shows 0V. Iv'e checked the fuse for continuity and it seems fine, and visually it doesn't look burnt. What can be the issue? I also got zapped by the large capacitor on the other side of the board (not visible in the photo), so the current does seem to flow over the board.