Hello,
Last week I was feeling a bit nostalgic and went to turn on my old playstation 2. It did not turn on. No red light, no green light, no signs of life.
So I took out my multi meter and took apart the playstation.
The power board is supposed to have an input of 120Vac and an output of 12Vdc.
The board is getting 120vac, but the output is zero.
The fuse right next to the main power input is good ( has continuity)
All the capacitors look good ( no leaking, no bulging)
Nothing looks burnt.
I'm not really sure where to look next. I would consider myself a novice with electronics.
If anyone could help I would greatly appreciate it !
Thankyou!
Last week I was feeling a bit nostalgic and went to turn on my old playstation 2. It did not turn on. No red light, no green light, no signs of life.
So I took out my multi meter and took apart the playstation.
The power board is supposed to have an input of 120Vac and an output of 12Vdc.
The board is getting 120vac, but the output is zero.
The fuse right next to the main power input is good ( has continuity)
All the capacitors look good ( no leaking, no bulging)
Nothing looks burnt.
I'm not really sure where to look next. I would consider myself a novice with electronics.
If anyone could help I would greatly appreciate it !
Thankyou!