hi, i' interested in using an 8 channel solid state relay board because they are cheap on ebay. they use the 5v G3MB-202P omron solid state relays http://people.ece.cornell.edu/land/...daw33/RemoteOutlet/datasheets/D20G3MB0503.pdf
i can drive it from my MCU no problem but the output side i'm switching 12v dc at 250ma.
the spec on the relay says output load 2 A at 100 to 240 VAC. does that mean it will not work at 12vdc like a normal relay would?
i can drive it from my MCU no problem but the output side i'm switching 12v dc at 250ma.
the spec on the relay says output load 2 A at 100 to 240 VAC. does that mean it will not work at 12vdc like a normal relay would?