I need an oscilloscope for serial communication debugging and potentially analogue filter and amplifier experimentation. I understand that audio will be the lowest frequency, but will also require a greater resolution.
I have £170 (~$230 atm!) of my own money to spend. What can I expect to get for this, can I expect anything with the specs required, (bandwidth, sampling etc) required for these purposes? I probably can get by with one with only one probe.
I will only be working with I2C, SPI, RS232 on ucs with clocks not exceeding 8mhz, so baud will not be high at all. As for audio, this will be some basic guitar analogue, so audio frequencies (as opposed to a guitar that plays at radio frequencies!)
I may be able to get nothing of any use for £170, but I am interested in suggestions.
Thanks,
I have £170 (~$230 atm!) of my own money to spend. What can I expect to get for this, can I expect anything with the specs required, (bandwidth, sampling etc) required for these purposes? I probably can get by with one with only one probe.
I will only be working with I2C, SPI, RS232 on ucs with clocks not exceeding 8mhz, so baud will not be high at all. As for audio, this will be some basic guitar analogue, so audio frequencies (as opposed to a guitar that plays at radio frequencies!)
I may be able to get nothing of any use for £170, but I am interested in suggestions.
Thanks,