Hey i'm trying to convert a 2x molex to a 6 pin pcie to a 2x molex to barrel plug. I have uploaded a picture of the 2x molex to 6 pin pcie I have and I have already removed all the wires from the pcie. Now my question is how would I go about installing the wires on a solderless 2.5 x 5.5mm barrel plug?
The yellow cable has to go to positive slot and black cable to negative slow, am I right in thinking this? Also what about the brown wire, where does that go if anywhere?
Thanks in advance for any replies and any help!!
The yellow cable has to go to positive slot and black cable to negative slow, am I right in thinking this? Also what about the brown wire, where does that go if anywhere?
Thanks in advance for any replies and any help!!