Maker Pro
Maker Pro

Ceiling Fan Capacitor Question

Greetings,

Having trouble finding the exact 4 wire ceiling fan capacitor that I need 4.8+6+6
I can get a 4 wire 4.5+6+6
Can I use this one without causing a problem with the fan?

Thank you for any advice you can give.

Mark
 
Thanks for the idea Minder. However, I'm not sure that is an option. There is limited space in these fan housings and these are relatively large "black boxes". Here is what I am looking for. Was wondering if I could use one with a 4.5uF in place of the 4.8uF shown.
Screenshot_20200708-141941-2.png
 
Hi Duke. 5% less than 4.8μF is 4.56μF. I'm guessing what you are saying is the tolerance of +-5% brings it close to the 4.5μF I was asking about. So if I use the 4.5μF, then we could ask what is 5% less than 4.5μF...but we won't. Your point is well taken. I don't think I'll worry about the 0.3μF difference. Thanks for your response.
 
Top