Maker Pro
Maker Pro

Archerkit -Radio shack 277-125 manual?

M

Mike W.

Found an unfinished project in the closet, an Archerkit 13.8v/5v power
supply. It's 95% assembled, but I want the instructions that tell you how to
place the jumpers to make it 13.8v or 5v, and how to adjust it. I can
probably figure it out, I just don't want to fry any components doing it.
These things were sold by Radio Shack maybe 20-25 years ago, so it's a long
shot.

Mike
 
J

James Sweet

Mike W. said:
Found an unfinished project in the closet, an Archerkit 13.8v/5v power
supply. It's 95% assembled, but I want the instructions that tell you how to
place the jumpers to make it 13.8v or 5v, and how to adjust it. I can
probably figure it out, I just don't want to fry any components doing it.
These things were sold by Radio Shack maybe 20-25 years ago, so it's a long
shot.

Mike

What's it use as the regulator? Should be able to just look up the
datasheet.
 
Top