Maker Pro
Maker Pro

Throttle Motor Control

Hello !

I want a circuit that will control Motor or Brushless DC Fan with Throttle of Bike. This is to be used in a bike to control Fan in Air Filter.
At Idle Fan should be Off.
As we go on accelerating, it should start and speed increase.
Also which switch/transducer should be used to sense movement of throttle handle ?
 
So what you want sounds like uC with ADC and PWM.

If this sounds like what you want, i can tell you more and from where and how to get info.

Of course there are other ways, but i usually work with uC so this is what i know and do.
 
Check your Gmail Inbox.

Check your Gmail Inbox.

So what you want sounds like uC with ADC and PWM.

If this sounds like what you want, i can tell you more and from where and how to get info.

Of course there are other ways, but i usually work with uC so this is what i know and do.
 
Top