SX-1000TW

[Johnkelly]

I am currently recapping an sx-1000tw and cannot locate caps (c3, 4, c5, 6). I found them on the schematic but can't locate them on the receiver. They are by the control amp on the schematic. If someone could tell me their locations it would be greatly appreciated.
Thanks in advance.

 

[Martaine2005]

Hi, Is it possible somebody was in there before you?
Maybe put film caps in?

Martin

 

[Johnkelly]

Thanks for the reply. Unfortunately, they do not have a designated board location.

 

[Martaine2005]

Ah ok, have a good look on the switches or near the switches.
I can't see the schematic too well. It wont enlarge without blurring.

Martin