Hello
I need help to find suitable software to program AT89s52 (look development board )
AT89s52 support Keil compiler , my Laptop have serial port , window
which suitable software is used to program AT89s52 ?
Hello
I need help to find suitable software to program AT89s52 (look development board )
AT89s52 support Keil compiler , my Laptop have serial port , window
which suitable software is used to program AT89s52 ?
I see that the board is made by Silicon TechnoLabs. Perhaps you could ask them about suitable programming software?
I couldn't find a website, but they do have a Facebook account:- https://www.facebook.com/SiliconTechnoLabs
If your board uses the same connections as the board on this page, you might be able to contact the author for info on the programming software. His email address is all over the page:- http://www.kmitl.ac.th/~kswichit /tahan/boards51/Board S51.htm
If your board uses the same connections as the board on this page, you might be able to contact the author for info on the programming software. His email address is all over the page:- http://www.kmitl.ac.th/~kswichit /tahan/boards51/Board S51.htm
ProgISP is perfect for burning in AT89s52, I have also stuck in this problem. Then this tutorial on burning 8051 microcontroller AT89s52 worked like a charm for a absolute beginner like me. Download ProgISP from here and just follow steps.
Although I want to warn that hardware shown in the picture, will not work for AT89c51 and c52, as I bought the same hardware shown in the pic.