Simulate and plot the output against the input using circuitmaker

[john ong]

Hi, does anyone knows how to find the plot of input against output of
a circuit using circuitmaker. The simulation always provide the plot
of the node at the probe against time. DOes any one know how to get
the i/p versus o/p plot. I'm using the student version of
circuitmaker.

Thanks

 

[Jim Thompson]

Hi, does anyone knows how to find the plot of input against output of
a circuit using circuitmaker. The simulation always provide the plot
of the node at the probe against time. DOes any one know how to get
the i/p versus o/p plot. I'm using the student version of
circuitmaker.

Thanks

If it's Spice-compliant, it's under "Transfer Function".

...Jim Thompson

 

[Kevin Aylward]

If it's Spice-compliant, it's under "Transfer Function".

Use 1 v as the input.


Kevin Aylward
[email protected]
http://www.anasoft.co.uk
SuperSpice, a very affordable Mixed-Mode
Windows Simulator with Schematic Capture,
Waveform Display, FFT's and Filter Design.

"That which is mostly observed, is that which replicates the most"
http://www.anasoft.co.uk/replicators/index.html

"quotes with no meaning, are meaningless" - Kevin Aylward.

 

[john ong]

can you explain further what you meant by using 1V as the input. Does
doing that allows me to see the relationship between the input and
output of the circuit?
John