Hi,
I'm thinking of installing an IP camera connected to a wifi station at a remote location about 100' from a building that houses the security camera network. The remote location has no AC line power for the Power Over Ethernet adapter to power the wifi or to power the camera. There is however a 12VDC landscape lighting line right there. Can it be used to power these two items?
Specifically I'm thinking of running:
Ubiquiti NSM2 wifi client: 24VDC, .5A http://dl.ubnt.com/nanoM2_DS.pdf
Everfocus EHD930F IP dome camera: 12 VDC or 24 VAC. http://www.discount-low-voltage.com/s.nl/it.A/id.19147/.f
Is this possible? What would I need to step up the 12VDC to 24VDC for the wifi?
I'm thinking of installing an IP camera connected to a wifi station at a remote location about 100' from a building that houses the security camera network. The remote location has no AC line power for the Power Over Ethernet adapter to power the wifi or to power the camera. There is however a 12VDC landscape lighting line right there. Can it be used to power these two items?
Specifically I'm thinking of running:
Ubiquiti NSM2 wifi client: 24VDC, .5A http://dl.ubnt.com/nanoM2_DS.pdf
Everfocus EHD930F IP dome camera: 12 VDC or 24 VAC. http://www.discount-low-voltage.com/s.nl/it.A/id.19147/.f
Is this possible? What would I need to step up the 12VDC to 24VDC for the wifi?