pc5010 prog ?

[Crash Gordon]

Can't seem to de-program opening closings...thought I did it correctly
but...not.

All I really want is open after alarm on this house.

(hate hex programming it's dumb)

 

[G. Morgan]

Can't seem to de-program opening closings...thought I did it correctly
but...not.

All I really want is open after alarm on this house.

(hate hex programming it's dumb)

If it's an ADT model you can't disable o/c reports.

Was this a takeover?

 

[CH®IS]

Can't seem to de-program opening closings...thought I did it correctly
but...not.

All I really want is open after alarm on this house.

(hate hex programming it's dumb)

Opening after alarm is in section 328.

To disable opening/closing reporting, enter 00 (eight times) in sections
344-347 and 339-342. Or just turn off option 1 in sections 365 and 366.

- Chris

 

[Crash Gordon]

It was a takeover I did 10 years ago...local guy that died...not ADT



--
**Crash Gordon**

 

[Crash Gordon]

holy moly...that's a lot of entries...but I get it now...I didn't do them
all so I musta missed where their codes were.

THANKS !



--
**Crash Gordon**

 

[Crash Gordon]

on second thought that's pretty weird...a company (ADT) that sends test
signals once a month has o/c's locked on???



--
**Crash Gordon**

 

[mleuck]

Can't seem to de-program opening closings...thought I did it correctly
but...not.

All I really want is open after alarm on this house.

(hate hex programming it's dumb)

You sending 4x2 or something? Just set it for SIA and enter 11 for
everything you want to report.

 

[mleuck]

on second thought that's pretty weird...a company (ADT) that sends  test
signals once a month has o/c's locked on???

It isn't locked, G's been drinking again

 

[G. Morgan]

It isn't locked, G's been drinking again

No, I haven't you weenie. I may be mistaken about the o/c lockout but there
was definitely some report codes that could not be disabled on ADT's version
of the 5010.