Maker Pro
Maker Pro

Palm m105 Memory Backup Capacitor

  • Thread starter Martin & Debbie Ghioto
  • Start date
M

Martin & Debbie Ghioto

I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source for
these caps or an equivalent I don't know about? Thank you.
 
W

Wild Bill

It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
..............
 
M

Martin & Debbie Ghioto

You would think that here in the States they would. Mouser has them listed
on their website, but I would have to get 1500 of them. Nothing at Digi-Key.
I finally ordered the Panasonic caps from Newark, but it is going to take 3
weeks. They have to get them from their sister company in England!
 
C

Christian B.

I'm also searchin for 2 caps "memory back-up" for a M125,..
BUT i dont know witch part number it is.

Where did u find yours? (part number) and do you know if it is the same part
for both M105 and M125 ???
 
C

Christian B.

I lost your original post,..can you post part number again please.

I need these caps too, for a M125.
 
C

Christian B.

I've to change caps in my M125 too.
Where do you get parts number for your M105?
Do you think it is the same as M125?

I tried to get part number from Palm but,...all they can say is "DO NOT OPEN
IT!!!"

Thanks
Chris
 
Top