Maker Pro
Maker Pro

Ok guys, heres another amp conversion question...

I was wondering out of curiosity if I can use an old reel to reel tube powered tape deck with a 1/4 input jack already in it to use as a guitar amplifier or is there an impedance difference that might cause electrocution?
 
No electrocution hazard, but there might be an impedance mis-match at the input of the amp, leading to high noise and low volume.
Maybe there's be a further noise problem from the old electrolytics in the power supply.

I'd put more effort into spelling and grammar, but this is a Windows phone.
 
Last edited:
Top