E
eyebee
G'day!
Half watching tv, half working on a portable tv set, I heated up the pads
for a 160V 1uF cap and grabbed what I thought was it from the blind side of
the board....pulling on it, it moved, but the legs on the track side didnt.
Bugger!
I had inadvertently grabbed the little horizontal feedback transformer and
pulled the coil from the mount....
It is marked "179" and it has 2 windings - one is still soldered to the
base, the other is so fine and is missing the winding from one side now, so
that i cant repair it
Does anyone have one lying around so i can get it going? or know what I need
to order and where to get it?
TV is model # CX-3434D
Thanks in advance!!!
Half watching tv, half working on a portable tv set, I heated up the pads
for a 160V 1uF cap and grabbed what I thought was it from the blind side of
the board....pulling on it, it moved, but the legs on the track side didnt.
Bugger!
I had inadvertently grabbed the little horizontal feedback transformer and
pulled the coil from the mount....
It is marked "179" and it has 2 windings - one is still soldered to the
base, the other is so fine and is missing the winding from one side now, so
that i cant repair it
Does anyone have one lying around so i can get it going? or know what I need
to order and where to get it?
TV is model # CX-3434D
Thanks in advance!!!
