Maker Pro
Maker Pro

JEDEC for technicians

C

Charles

JEDEC seems to be into memory specs these days and no longer into basic
semiconductor devices.

There was a time when JEDEC and PRO ELECTRON held some sway over part
numbers and such. JEDEC seems to still be into semiconductor device package
standards, however.

4N and 6N part numbers are out there. They seem to be beyond the old JEDEC
system and relate to opto-couplers.

Is there an expanded/updated version of the 1N, 2N, 3N JEDEC system?
 
P

Phil Allison

"Charles is Off with the Fairies "
JEDEC seems to be into memory specs these days and no longer into basic
semiconductor devices.

There was a time when JEDEC and PRO ELECTRON held some sway over part
numbers and such. JEDEC seems to still be into semiconductor device
package standards, however.

4N and 6N part numbers are out there. They seem to be beyond the old
JEDEC system and relate to opto-couplers.

Is there an expanded/updated version of the 1N, 2N, 3N JEDEC system?


** Wot is this loon on about ?

The JEDEC device numbering system was of benefit only to manufacturers.

A 2Nxxxx number could be a transistor of either polarity, a J-FET or a
bloody triac!!!


...... Phil
 
Top