Maker Pro
Maker Pro

inverse filtering?

S

sperelat

I do time-domain simulation of signal that passed electronic filters.
Now, my task is reconstructing original signal with signals that
passed filter

To get inverse filgering ,I reversed transfer function, but it makes
error.

What did I have to do to get inverse filtering?
 
M

MooseFET

I do time-domain simulation of signal that passed electronic filters.
Now, my task is reconstructing original signal with signals that
passed filter

To get inverse filgering ,I reversed transfer function, but it makes
error.

What did I have to do to get inverse filtering?


You may be asking the imposible. Check that the tranfer function of
the filter doesn't have any zeros (notches). If the amplitude of any
frequency component is multiplied by zero, the information is gone.

Next you need to look carefully at the phase shift. The output of a
filter can never contain information from the future of its input.
The entire output must be delayed so that this is not needed.

Lastly you have to consider accuracy and noise issues. It doesn't
take much of an error in the cut off frequency to make quite a
significant error in the cancelation.
 
Top