Maker Pro
Maker Pro

How do I see posted diagrams??

How do I see posted diagrams, that says required photo bucket after having a photo bucket account please?
Big thanks Ben:):)
 

davenn

Moderator
How do I see posted diagrams, that says required photo bucket after having a photo bucket account please?
Big thanks Ben:):)


Hi ya Ben
welcome to EP :)

in general is it preferred to upload the pix directly to the forum thread you want to create
keep the image size to a max of around 800 x 600 and preferably compress to less than 150kb, even more preferably to 100kb or less

regards
Dave
 
Hi David, thanks for the warm welcome :)
I actually mean how do I see other people's diagrams in their posts please? :) Picture attached.
 

Attachments

  • Screen Shot 2017-11-19 at 1.27.47 PM.png
    Screen Shot 2017-11-19 at 1.27.47 PM.png
    217.9 KB · Views: 148
Last edited by a moderator:

davenn

Moderator
Hi David, thanks for the warm welcome :)
I actually mean how do I see other people's diagrams in their posts please? :) Picture attached.


OK the example you gave is a problem with the OP's photo bucket's account
there is nothing we can do about that and unless they upgrade their account as they have been told to
you will never see the photo
That particular problem is all across forums everywhere and it's another reason to do what I said in
my earlier post


probably have to join up to photobucket.

no that isn't the problem
 
Sir Ben Fun . . .

That was an OLD post that just recently got bumped up and revived into activity by a later add on by a person.

The host of that image has dropped hosting it since.
If you will refer to the NEWEST additions to that post i believe that some info was repeated again and is now available.
By virtue of that image info now being rehosted at a different site.

See this continuation so that you can see new relevent pictures being repeated as newly hosted units.

https://www.electronicspoint.com/th...-problems-pictures.243585/page-2#post-1747762

Photos of particular interest are being on post # 38.



FIX DAT CLOCK !

73's de Edd
 
Last edited:
Thank you very much everyone for the amazing advice :) if I have success with fixing this circuitboard I'll definitely
Make a nice post on how I did it :) have a great evening Ben:):)
 
Top