ESP Infinite Factory Reset

[[email protected]]

Hi,

I had an ESP infinite wireless alarm installed in December, the
engineer did not provide a master code however. Now I need to move the
main box (as a door is going there) and add a new sensor to the system.


The company that installed it will not provide me with the master code
(as presumably the set them all the same) and the manufacturer will
only reset it to the factory defaults if I send them the mainboard.

Does anyone know the procedure to reset the system to the factory
defaults (disconnect power and restart whilst holding down a
button/jumper details to reset CMOS data etc)?

Many thanks,
Adrian

 

[Crash Gordon]

Why would you need the master code to move the box?
Why not have the installing company do the work?


| Hi,
|
| I had an ESP infinite wireless alarm installed in December, the
| engineer did not provide a master code however. Now I need to move the
| main box (as a door is going there) and add a new sensor to the system.
|
|
| The company that installed it will not provide me with the master code
| (as presumably the set them all the same) and the manufacturer will
| only reset it to the factory defaults if I send them the mainboard.
|
| Does anyone know the procedure to reset the system to the factory
| defaults (disconnect power and restart whilst holding down a
| button/jumper details to reset CMOS data etc)?
|
| Many thanks,
| Adrian
|

 

[[email protected]]

Hi,

I'd need the master code to install the new sensor, on your second
point I can get a sensor for £41.00 and fit it myself, whereas the
company would charge over £100 (£90.00 for the sensor + call out +
install).

Adrian

 

[Crash Gordon]

If you're a monitored client of their's I doubt they will want you mucking
about in programming as one minor mistake in programming by you will be
their liability and possibly your heartache.




Hi,

I'd need the master code to install the new sensor, on your second
point I can get a sensor for £41.00 and fit it myself, whereas the
company would charge over £100 (£90.00 for the sensor + call out +
install).

Adrian