Ok now I installed 6 electrolytic capacitors on each board. The left side of the amp is fine. Everything checks out so far. Oh the thermal protection light on the left side does not light up on plug in. DC offset was good bias was good. The right side went distortion alert bright as all can be. I read the dc offset and it was out a good bit 3.78 so I went to adjust it a little and turned it up the whole way and the distortion light went off. Also the right side get warm quick and then starts to get to running tempitures I would say 10 minutes. While the left side started to loose its chill. Ok well not sure what sparked this. Well I am calling it will refresh and get back at it.
Last edited by a moderator: