bigone5500 submitted a new Showcase Item:
24v stepper controlled by aruduino
Read more about this showcase item here...
24v stepper controlled by aruduino
I finally have a 24v power supply and want to control a stepper with an arduino. Never done this before and think it should be easy. I will be using an UNO and two P-channel MOSFETS and two N-channel MOSFETS. My theory is that I can connect digital pins to the gates of the four MOSFETS, 24v to the source pins, and ground the drains. The UNO will be powered by the 24v through a 5v regulator.
Any suggestions are welcome.
Read more about this showcase item here...