I have a Chemetron wirefeeder that I am using the motor and I want to use the speed control out of the control box to control the nice motor it had in it...but I am having trouble figuring the wiring schematic out. I've attached the schematic and the two parts that I think I need to wire. I could use some help making sure I've salvaged all the parts I need to run the motor. I have the potentiometer as well that is mentioned on the schematic. Any help would be appreciated.
I have a chemetron wirefeeder that I am trying to isolate the dc motor speed control circuit from all the other welding circuits. I want to use the motor for my metal lathe to control low speed fine cuts on the carriage feed. I would appreciate any help on this project!
here's the link to pics of the schematic
https://www.electronicspoint.com/ch...g-salvage-dc-motor-speed-control-t253137.html
I have a chemetron wirefeeder that I am trying to isolate the dc motor speed control circuit from all the other welding circuits. I want to use the motor for my metal lathe to control low speed fine cuts on the carriage feed. I would appreciate any help on this project!
here's the link to pics of the schematic
https://www.electronicspoint.com/ch...g-salvage-dc-motor-speed-control-t253137.html
Attachments
Last edited by a moderator: