Maker Pro
Maker Pro

Where to get shorting strap for terminal posts

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
I have a piece of equipment missing some shorting straps for use when 4 wire measurements are not going to be used.

upload_2018-12-16_13-40-50.jpeg

Purchasing them from eBay (or any other obvious choice) is ridiculously expensive.

Anyone know a reasonable alternative? I guess an appropriately shaped piece of wire would work, but these don't fall off as easily.
 

hevans1944

Hop - AC8NS
Try this page and click on the "buy" basket icon to see price from each vendor. The part is expensive, more than three bux for each piece. Some vendors will sell you just one, but most of the time they want to sell you ten.
 
Top