Maker Pro
Maker Pro

what kind of ac/dc adapter would connect to this external camera flash?

D

Dan Hollands

..com
James said:
Hi,

anyone know what kind of ac/dc adapter i would need to hack this into
letting me plug it into a wall insted of using batteries?
http://www.bhphotovideo.com/bnh/con...s&Q=&sku=206436&is=USA&addedTroughType=search
--

Since it uses 4 1.5v batteries - they are probably in series making them a
nominal 6Vdc

I believe a 5V dc supply would work fine but I would take a look at the way
the batteries are installed to make sure they are in series.

Dan

Dan Hollands
1120 S Creek Dr
Webster NY 14580
585-872-2606
[email protected]
www.QuickScoreRace
 
J

James

how do i know if they are in series?


Dan Hollands said:
.com


Since it uses 4 1.5v batteries - they are probably in series making them a
nominal 6Vdc

I believe a 5V dc supply would work fine but I would take a look at the
way the batteries are installed to make sure they are in series.

Dan

Dan Hollands
1120 S Creek Dr
Webster NY 14580
585-872-2606
[email protected]
www.QuickScoreRace
 
D

Dan Hollands

James said:
how do i know if they are in series?


If the plus terminal of one battery is connected to the minus terminal of
the next for all 4 batteries they are in series. If you have a volt meter
you can measure the voltage at the point where the batteries connect to the
unit and you should measure 5 to 6 volts.
If you can't figure it out to do this you may want to reconsider taking the
unit apart and reworking it.


Dan
Dan Hollands
1120 S Creek Dr
Webster NY 14580
585-872-2606
[email protected]
www.QuickScoreRace.com
 
Top