Maker Pro
Maker Pro

[Weird problem] Insignia 37" LCD


No clue what is going on for this to happen, and how to solve this. It all started after a few months of using my old xbox360 and now this is whats happened to it. The TV is about 9 years old and our second TV, which we used to project the xbox before, was 4 years old and smaller but similar in model, broke in the same manner.

EDIT: If it doesn't fade out like that, it's just jittery and as though the picture is remaining the same, except like static-like display.

Any information as to what this could be and how to solve it would be immensely helpful.
 
Hello Ryman230! Welcome to the Forums!

Hmm, well first guess would probably be bad capacitors (one of the most common faults of all).

Open it up and take a clear picture of any circuit board in sight. Post the photos here, and we'll see if there's anything obvious.
Dan
 
http://imgur.com/a/YOxem

WnQxQ1e.jpg

tHgBypy.jpg

nJUKYVD.jpg

CrkFLmp.jpg

pzudH19.jpg
 
Last edited:
Top