Maker Pro
Maker Pro

vcr head diag

hello
i have arca old vcr and when i play the cassette i have line on it
i try a different cassette and its the same
what it can be alignment ???
thanks
 
The head is probably due for a clean.
Clean it first with IPA and a cotton bud then see how it plays.
Also, might be useful to take a picture of the screen as different faults cause various picture problems.

Martin
 

Harald Kapp

Moderator
Moderator
No need for a video. A still photo of the effect on screen is sufficient. Observe filesize max. ca. 300 kB.
 
ok wish one are the head ?
also i read it could be a dead heads also mot worthing to repair ?
 
Last edited:

davenn

Moderator
ok wish one are the head ?
also i read it could be a dead heads also mot worthing to repair ?


Definitely a dirty video head
The large aluminium head that spins

what should i use to clean this i have coton swab with alcohol

yup as Martain said earlier

The head is probably due for a clean.
Clean it first with IPA and a cotton bud then see how it plays.

IPA = Isopropyl Alcohol


Be VERY gentle
 
just brought a second hand vhs for 25 $ some tapes are having lines too is its because of the ages of the tapes or again the device ?
Thanks
 

bertus

Moderator
Hello,

It depends a bit on wich system the VCR is based.
On a video2000 system (mainly philips made), I would not try it as the heads are mounted on a piezo arm, to be able to make corrections.

Bertus
 
Top