Using a logic signal to switch a load

[arjun400]

Which simple electronics devices can be used to operate the system when pulse goes from 0 to 1 and off the system when pulse goes from 1 to 0?

 

[Bluejets]

What is the "system"..?

 

[arjun400]

@Bluejets automatic water level controller

 

[(*steve*)]

Which simple electronics devices can be used to operate the system when pulse goes from 0 to 1 and off the system when pulse goes from 1 to 0?

A transistor controlling a relay should do it. Then use the relay to control the load.

 

[BobK]

A Bipolar transistor, a MOSFET, a triac or scr (if AC), a relay, a solid state relay. Which one you would use depends on the details of what you are trying to switch.

Bob

 

[arjun400]

@*steve*

A transistor controlling a relay should do it. Then use the relay to control the load.

Thank you so much

 

[arjun400]

A Bipolar transistor, a MOSFET, a triac or scr (if AC), a relay, a solid state relay. Which one you would use depends on the details of what you are trying to switch.

Bob

Thank you so much for your appropriate suggestion