Time of Flight sensor array

[Mate Koroknai]

Hi,

I would like to create a 2D array (let's say 30x30) out of sensors like this:
https://www.adafruit.com/product/

My goal is to create a 3D model of the surface that I will put in front of the sensors.

The question:
If I place the sensors right next to each other, is it going to be a problem that they use light of the same wavelength?
Will they still provide accurate measurements?

 

[sumeryamaner]

Please check the link.

 

[Mate Koroknai]

Hi,

I would like to create a 2D array (let's say 30x30) out of sensors like this:
https://www.adafruit.com/product/

My goal is to create a 3D model of the surface that I will put in front of the sensors.

The question:
If I place the sensors right next to each other, is it going to be a problem that they use light of the same wavelength?
Will they still provide accurate measurements?

Sorry, I hope this link works:
https://www.adafruit.com/product/3316

 

[sumeryamaner]

I think you don't need to activate all units at once. You can create an activation pattern for the sensors to prevent a possible crosstalk.