Success!
I bought two of the spindle motor below, the 26-140. I replaced the
RF-320CH-12400 in my DVP-S330 and my DVP-NS715P with the 26-140 motor
below. The only problem was that the spindle length was a bit to
long
-- I think that the 26-160 would have worked perfectly without
modification. I now have two working DVD players, with a cost of $17
including shipping.
I also took some pictures of the process -- email if interested.
Ben
[email protected] wrote:-
I have two Sony DVD players with the same problem, with the same bad
part.
Check out this page, which lists some data about this part (or-
rather,-
a replacement for it) and some similar parts:
http://www.fafa-motor.com/doce/cp.htm
If you look at that page, it looks like the RF-310TA-11400 is very
similar, but with a different shaft length (0.62" vs 0.37").
I found that motor for sale he
http://www.electronix.com/catalog/default.php/cPath/1_23
The part on the fafa-motor site corresponds to Electronix's 26-110.
Now, the 26-140 seems to be the same thing as the 26-110, but with a
shaft length of 0.42". And the 26-160 weighs in at 0.35". And-
they're-
only $5.99 each!-
