Maker Pro
Maker Pro

Simon buzzer

T

Techvoid

just incase anyone is left here clinging to what was I will post this
request for HELP into the void before usenet finally fades into oblivion. ;)
anyone ever replace the piezo buzzer in a GE Simon3? PZN-65 is the # on the
part.
I tried a ATW piezo but it is 96 db and I can barely hear the e e tones at
full volume and it doesn't really fit.
The pzn is about 110 db. 'PZN-65 with lip' will fit the Simon perfect if I
can find somewhere to buy a few.
I've been blasted googlin and bingin more than twice and I can't find one
for sale.
dang internets
TIA
 
T

Techvoid

Frank Kurz said:
You could always solder a pair of leads to the board and mount the damn
thing remotely (like in the wall space).

if I can find one.
 
T

Techvoid

RockyTSquirrel said:
"Techvoid" wrote in message

just incase anyone is left here clinging to what was I will post this
request for HELP into the void before usenet finally fades into oblivion.
;)
anyone ever replace the piezo buzzer in a GE Simon3? PZN-65 is the # on
the
part.
I tried a ATW piezo but it is 96 db and I can barely hear the e e tones at
full volume and it doesn't really fit.
The pzn is about 110 db. 'PZN-65 with lip' will fit the Simon perfect if
I
can find somewhere to buy a few.
I've been blasted googlin and bingin more than twice and I can't find one
for sale.
dang internets
TIA
-------------------------------------

Try here, I find a lot of off the wall and odd stuff, I've used this
company for more than 15 years....

RTS

http://www.allelectronics.com/make-a-store/category/115/Buzzers-Beepers/1.html

yea, saw them, thanks.
 
Top