Hi all. I just purchased this projector (Sharp PG-M20X) second hand and I have some problems with it, hopefully some of you will have an idea - Thanks in advance !!
It generally shows a great picture, but after a few minutes of work (or about 15 minutes when using the Power Save, lower wattage mode) the picture will suddenly start to "jump" and loose it's colour. The exact description is that I can see a stable picture at the background and another stuttering image over it which "jumps", and colours are getting lost slowly till it totally jumps and loose all colours.
I experimented by opening the cover and placing a big fan over the projector while operating,
and the problem didn't happen as long as the fan was there.
Can anyone please direct me about a possible cause for this issue ?
Thanks very much !
It generally shows a great picture, but after a few minutes of work (or about 15 minutes when using the Power Save, lower wattage mode) the picture will suddenly start to "jump" and loose it's colour. The exact description is that I can see a stable picture at the background and another stuttering image over it which "jumps", and colours are getting lost slowly till it totally jumps and loose all colours.
I experimented by opening the cover and placing a big fan over the projector while operating,
and the problem didn't happen as long as the fan was there.
Can anyone please direct me about a possible cause for this issue ?
Thanks very much !
