Setting the address of an Ademco 6150

[Andrew]

Hello Folks, I'm trying a do-it yourself security system installation
and I have appeared to have lost the manual for the keypad. It's a
6150 (with a vista 20P REV3). One of the steps is that I need to set
the address to 16, but I don't know how.

Does anyone here know how to do this?

Thanks for the help,
Hick

 

[Nick Markowitz]

within 60 seconds of powering up the key pad push 1 and 3 keys together
keypad address will apear usualy 31 change to 16 then hit star key

--
Nick Markowitz Jr.
Owner
Markowitz Electic Protection
Private Industry Fire Investigator.
Qualified Electrical- Fire Alarm Contractor
Registered EPA Freon Recovery

Contributing Editor Pa. Firemans Magazine
Staff Editor www.securitymission.com
Senior Correspondant www.1strespondernews.com
Exclusive Correspondant www.nbfd.us
Contract Broadcast Engineer WAVL 910 AM apollo Pa.

"To error is human to realy foul things up requires a computer"

Irish Diplomacy

The ability to tell a man to go to hell and he tells you how much he is
going to enjoy the trip.