Sending a hex number to 8 pins

[gregfox]

Hi all,
I'm trying to send a hex code to 8 pins of a parallax propeller in c.
Send hex 38 to pins 27,26,25,24,23,22,21,20 which is 00111000 in binary, so that;
0 goes to pin27
0 goes to pin26
1 goes to pin25
1 goes to pin24
1 goes to pin23
0 goes to pin22
0 goes to pin21
0 goes to pin20
In stead of sending a binary to each pin I want to send a single hex code.
Thanks

 

[(*steve*)]

Look at I/O group operations starting on page 5.

http://nagasm.org/ASL/Propeller/printedPDF/IOTimingBasicsv10.pdf

 

[cjdelphi]

You'll find those 8 pins are infact 8bits

You should be able to set the value and each bit will represent the byte..