I just went out on this call and looked at this set. There is a
dynamic convergence problem. When attempting to perform the
convergence procedure with the remote the set seems to go through the
motions but does not converge. I took a chance and pulled the
convergence board. It uses two STK 392-040's. I plan to try replacing
them and looking at all the small resistors on the board as well. Does
anyone have any further tips for me on this one? Thanks, Lenny.
dynamic convergence problem. When attempting to perform the
convergence procedure with the remote the set seems to go through the
motions but does not converge. I took a chance and pulled the
convergence board. It uses two STK 392-040's. I plan to try replacing
them and looking at all the small resistors on the board as well. Does
anyone have any further tips for me on this one? Thanks, Lenny.
