Maker Pro
Maker Pro

Replacement laptop LCD has weird white border

N

NewCreature

My son just replaced the LCD in his sony laptop and now have a problem
that I don't quite understand. When I power up the laptop into windows,
I get a 1/2" hazy white border on all four edges of the monitor. Any
guesses what could cause this?


Mike
<><
 
S

Sam Goldwasser

NewCreature said:
My son just replaced the LCD in his sony laptop and now have a problem
that I don't quite understand. When I power up the laptop into windows,
I get a 1/2" hazy white border on all four edges of the monitor. Any
guesses what could cause this?

Does the border obsuce part of the normal desktop or is everything smaller?

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
N

nucleus

i had similar problem long ago, memory is vague on that issue but
solution involved resetting display properties. is replacement a
different brand?
 
J

Jerry G.

Without seeing it myself, it is difficult to say. But, a common cause
is the backlights shinning through on the edges. It is also possible to
have a defective display.


Jerry G.
======
 
B

bz

My son just replaced the LCD in his sony laptop and now have a problem
that I don't quite understand. When I power up the laptop into windows,
I get a 1/2" hazy white border on all four edges of the monitor. Any
guesses what could cause this?

Perhaps the replacement screen is NOT an exact replacement?
Perhaps it is defective.




--
bz 73 de N5BZ k

please pardon my infinite ignorance, the set-of-things-I-do-not-know is an
infinite set.

[email protected] remove ch100-5 to avoid spam trap
 
Top