Maker Pro
Maker Pro

Reparing a PM2434 Philips microvoltmeter

Hello guys,

I want to repair my old beloved Philips microvolt meter of which the modulator (chopper) mosfets have died. They were dual gate BSV81 mosfets and I decided to replace them with dual gate MFE201 mosfets, because that is the best I could buy. (Anyone with a couple of real BSV81 s?) They are only used as switches, so I decided to give it a try.

My problem is that the MFE201 has a different pin-out and that I cannot figure out which gate is which. I wonder if anyone can advise me on the subject. I have attached three pictures.

1. The concerned part of the circuit diagram of the voltmeter.

aa.jpg


2. The pinout of the original BSV81

ab.jpg

3 The pinout of the MFE201 that I found on the web.

ac.jpg


Thank you reading this.
Best regards
Bob Andriesse

[Mod. edited to resize images]
 
Last edited by a moderator:
Top