Maker Pro
Maker Pro

ProScan 27" Giveaway! - NJ

M

Matt-NJ

My 19 year old 27 inch ProScan TV just lost vertical scan.
Probably just the output driver transistor.
I have repaired this TV before, and have both the factory shop manual
(complete with waveforms, circuit diagrams and helpful hints for
service.) and a spare main circuit board fully populated.
When new this set had the latest of every feature known to man!

At this point I'd like to just give the set away, rather than scrap
it. However, it does need a (hopefully simple) repair.

I'm in Bergen County, New Jersey - very near Parkway exit 168.

If interested email me: [email protected] or call: (201)666-9207

- Matt
 
M

Mike S

Matt-NJ said:
My 19 year old 27 inch ProScan TV just lost vertical scan.
Probably just the output driver transistor.
I have repaired this TV before, and have both the factory shop manual
(complete with waveforms, circuit diagrams and helpful hints for
service.) and a spare main circuit board fully populated.
When new this set had the latest of every feature known to man!

At this point I'd like to just give the set away, rather than scrap
it. However, it does need a (hopefully simple) repair.

I'm in Bergen County, New Jersey - very near Parkway exit 168.

If interested email me: [email protected] or call: (201)666-9207

- Matt

Your best bet is to place in in the "free" section of New Jersey Craigslist.
http://newjersey.craigslist.org/zip/
 
Top