Maker Pro
Maker Pro

Problem displaying on OLED

Hi, I'm on a project where I would like to measure a battery voltage. For that, I have to use a Digital Current and Power Monitor, called INA260 and using the PIC18F26K80. I can already read the values of the INA260 the only problem is that when I want to show these values on an OLED it doesn't show and it doesn't seem to start. I already had a project that worked perfectly with the OLED. I just imported the OLED library for this INA260 project and I am not able to show anything. Is it some communication conflict because the two are by I2C?

Project Code: https://github.com/D1ng00/INA260_OLED
 
Hi, I'm on a project where I would like to measure a battery voltage. For that, I have to use a Digital Current and Power Monitor, called INA260 and using the PIC18F26K80. I can already read the values of the INA260 the only problem is that when I want to show these values on an OLED it doesn't show and it doesn't seem to start. I already had a project that worked perfectly with the OLED. I just imported the OLED library for this INA260 project and I am not able to show anything. Is it some communication conflict because the two are by I2C?

Project Code: https://github.com/D1ng00/INA260_OLED


Check your i2c addressing.
 
Top