power832

[Rapid]

What do I need to add keyfobs to a DSC Power 832 PC 5010. Currently has no
wireless capability.
TIA

 

[Frank Olson]

What do I need to add keyfobs to a DSC Power 832 PC 5010. Currently has no
wireless capability.
TIA

PC-5349. It's a wireless receiver. It's also compatible with the newer
stuff from DSC and can "talk" to both 433 MHz and 900 MHz devices.

 

[alarman]

This kit works really well, and it's inexpensive. Great if you just need the
keyfobs and need no other wireless.
js
http://library.ademconet.com/MWT/fs2/2/5942.pdf

 

[Rapid]

This kit works really well, and it's inexpensive. Great if you just need
the keyfobs and need no other wireless.
js
http://library.ademconet.com/MWT/fs2/2/5942.pdf

cool. it says button 1 is "alarm on-stay". does that mean it can't be
armed to away?

 

[Rapid]

PC-5349. It's a wireless receiver. It's also compatible with the newer
stuff from DSC and can "talk" to both 433 MHz and 900 MHz devices.

great. that and a 4939-433 fob? I am looking at website that lists a
5108WKK1-433 kit with transmitter and reciever, says its power series
compatible. Is that correct?

 

[Tommy]

You might try a Street Smart Code encryptor.
http://www.security.honeywell.com/hsce/products/wireless/au/st/19442.html

They are very easy to add into a system if you only want a remote and not
adding any wireless zones. you do not even have to enter the panels
programming.

 

[Tommy]

I have never used that module, but dosent it just pair an old reciever and a
new reciever on the same system? I did not think that it is a reciever in
itself.

 

[alarman]

cool. it says button 1 is "alarm on-stay". does that mean it can't be
armed to away?

A momentary press of button 1 arms in the away mode. Holding the button down
for a couple seconds arms in stay.
js

 

[Frank Olson]

Thats not a receiver Frank

Whoops! My "bad"...

 

[Rapid]

A momentary press of button 1 arms in the away mode. Holding the button
down for a couple seconds arms in stay.

kewl

 

[Robert L Bass]

Whoops! My "bad"...

How long did you say you worked with DSC?

 

[Frank Olson]

How long did you say you worked with DSC?

About as long as you worked with Napco.

 

[R-Guy]

What do I need to add keyfobs to a DSC Power 832 PC 5010. Currently has
no wireless capability.
TIA

I just installed a PC5102-433 receiver and some WLS-919-433 fobs on my
PC5010 system and it works fine. The receiver also has 2 relay outputs, so
you can assign one of the buttons to trigger your electric garage door
opener if you want.

You easily usually find this stuff on eBay for fairly cheap.