Maker Pro
Maker Pro

Pinout help for DPM

T

Tim Williams

I hold here a Digitec 2611-27X. It's old enough that it has linear power
supplies and a VFD. I get very few hits pertaining to the 2611 series on
Google, and literally *nothing* on the -27X specifically.

Surely one of you old fogies has something in your file to help?

Tim
 
R

Rich Grise

I hold here a Digitec 2611-27X. It's old enough that it has linear power
supplies and a VFD. I get very few hits pertaining to the 2611 series on
Google, and literally *nothing* on the -27X specifically.

Surely one of you old fogies has something in your file to help?

Probalby, but we probably don't want to help out some little snot that
casts insults while asking for free help.

Good Luck!
Rich
 
T

Tim Williams

Rich Grise said:
Probalby, but we probably don't want to help out some little snot that
casts insults while asking for free help.

Fogies, I suppose, you consider offsensive? Certainly not my intention, I
had hoped to use the connection of age with _wisdom_ in there.

Tim
 
J

Jamie

Tim said:
So Does anyone have any data?...Pretty please?

Tim
Sounds like a special edition run for an OEM.
you'll find that in a lot of cases.
it most likely is the same as one of their
generic runs only with out something like the
name tag in front etc..
Zumbach was good for this. We were able to get
the exact replacement 4.5 digit replacement from the
original manufacture using their part number ordering
system.
the Zumbach number is on their records and ends up
crossing over to the combination we ordered.

Other than that, have fun.
 
R

Rich Grise

Fogies, I suppose, you consider offsensive? Certainly not my intention, I
had hoped to use the connection of age with _wisdom_ in there.

Then, the word you're looking for would be "venerable". ;-)

But, "old fogy" has unpleasant connotations.

Cheers!
Rich
 
S

Spehro Pefhany

Then, the word you're looking for would be "venerable". ;-)

But, "old fogy" has unpleasant connotations.

Cheers!
Rich

Oh, go venerate yourself.
 
Top