Pickit3 or icd3 programmers

[Rajinder]

Hi all,
Is there anyway to make the PICKit3 or ICD3 as gang programmers?
Mostly programming PIC18F family under MPLAB.
Is there any information available to understand the process of prigrammung i.e. VPP, Clock and data signals etc.

Thanks in advance.

 

[Mark2019]

Hi Rajiner

I've not build this as yet nor tried this but reading through this its does look as though this may well work as required (You wont lose to much sleep if it doesent put it that way )

Here is the site which should assist you Other than this its get in touch with microchip and read through data sheets
http://www.elproducts.com/build-your-own-pickit-2.html

https://obddiag.net/picprog.html http://www.elproducts.com/build-your-own-pickit-2.html

 

[Rajinder]

Thanks for the reply. I will have another good read through the Microchip da. tasheets.

 

[Mark2019]

No problem at all Your welcome