i am using this circuit , and the problem i am facing is that sometimes when the input is becomes enough to make the output high and then gets to 0 value the opamp still outputs a high value, is there any way to ensure that ouput comes to 0 after the input has gone low...
the circuit is for a vibration sensor, and the input is induced in the coil via a vibrating magnet on the spring ...
the circuit is for a vibration sensor, and the input is induced in the coil via a vibrating magnet on the spring ...
![57875d1309064891-untitled.png](/forums/proxy.php?image=http%3A%2F%2Fwww.edaboard.com%2Fattachments%2F57875d1309064891-untitled.png&hash=cd6b7e4df3cce699a77b44d5174cb57a)