Old DSC PC1500

[Niklas Granhage]

Hi

There seems to be a lot of people on this NG that has been around for a
while. Hopefully any of you will be able to (and willing to) help me out.

I recently bought a house which has an old alarm installed. It works but I
need to reprogram the phonenumbers.

The alarm is a DSC PC1500 with firmware version 3.20. I have the Master code
and the Installer code, but not the original manual. I have downloaded the
Installation manual for firmware version 4.0 and 4.1 but it seems like the
programming sections does not match.

Anybody have a copy of the installation manual for firmware version 3.2? or
at least a list with the programming sections?

Best regards

Niklas Granhage

 

[petem]

fore the phone number and client id its all the same thing...

 

[Niklas Granhage]

Thanks

fore the phone number and client id its all the same thing...

I guessed that. But I need to make sure that the "Communication
formats" (number 23 on v4.0) and "Communicator call Directions"
(number 25 on v4.0) are correctly set as well. Besides that I would
like to change the "Master code" (number 21 on v4.0). When I looked at
the content of the different sections yesterday it seemed like the
"Master code" was in section 23 instead of 21. Can that really be
correct?

Best regards

Niklas Granhage