Old DSC 2550 Problems

[Jake Dakota]

I have a very old (!) DSC 2550 and need some help. I was working on re-
connecting the wires to the siren that a squirrel had eaten through,
and now all of my zone lights on the keypads are on and the system
will not arm. I have reset the system by powering down, but no change.
Any ideas?

Thanks,

JD

 

[[email protected]]

I have a very old (!) DSC 2550 and need some help. I was working on re-
connecting the wires to the siren that a squirrel had eaten through,
and now all of my zone lights on the keypads are on and the system
will not arm. I have reset the system by powering down, but no change.
Any ideas?

Thanks,

JD

I don't use DSC but if your panel has fuses you can start by checking
them first.
RW

 

[Jake Dakota]

I don't use DSC but if your panel has fuses you can start by checking
them first.
RW

I found the problems...one was a fuse and the other was a programming
issue...programmed to show "not closed loop" or something like that.

Thanks,

JD