Maker Pro
Maker Pro

Newbie to OrCaD 10.5

B

Boki

Boki 寫�:
Hi All,

I dont' know why, whatever I do, it alwasy says there is no circuit
http://photos1.blogger.com/blogger/1641/2018/1600/bjt.png
http://photos1.blogger.com/blogger/1641/2018/1600/cis.png


Could you please advice what should I do ?

Best regards,
Boki.


Here is the log information:
-------------------------------------------------
Creating PSpice Netlist
Writing PSpice Flat Netlist C:\Boki
Circuit\test-PSpiceFiles\SCHEMATIC1\SCHEMATIC1.net
WARNING [NET0093] No PSpiceTemplate for Q1, ignoring
PSpice netlist generation complete
 
C

Charlie Edmondson

Boki said:
Hi All,

I dont' know why, whatever I do, it alwasy says there is no circuit
http://photos1.blogger.com/blogger/1641/2018/1600/bjt.png
http://photos1.blogger.com/blogger/1641/2018/1600/cis.png


Could you please advice what should I do ?

Best regards,
Boki.
Boki, Boki, Boki...
You did normal error #3 - you used non-pspice symbols in a PSpice
simulation. The only parts you want to use are in the PSpice directory
in the libraries. All those others don't have simulation models or
other properties...

Charlie
 
B

Boki

Charlie said:
Boki, Boki, Boki...
You did normal error #3 - you used non-pspice symbols in a PSpice
simulation. The only parts you want to use are in the PSpice directory
in the libraries. All those others don't have simulation models or
other properties...

Charlie


Soga... thank you very much.

Best regards,
Boki.
 
Top