Maker Pro
Maker Pro

Need to know about the NJM4565

G

Gaetan Mailloux

Hi

Is there a direct (but much better) replacement ic, with very much lower
distortion, to replace the NJM4565 (with same pinout) ?

Thank

Gaetan
 
G

Gaetan Mailloux

E

Eeyore

Gaetan said:
Hi

Is there a direct (but much better) replacement ic, with very much lower
distortion, to replace the NJM4565 (with same pinout) ?

The NJM4565 has the standard dual op-amp pinout.

You could replace it with an NJM4580, NE5532 or for state of the art try an
LM4562 (but beware of their extra bandwidth). Also check out the power supply
consumption if you're going to replace lots of them.

Graham
 
Top